Видео

Nice setup with turning the amps on and off. My one suggestion is that it would probably be much safer to have the Solid State Relays trigger a multi-stage power conditioner, such as a furman PS-8R. Keeps all the high voltage contained in a metal, fire proof case, and staggers start up to avoid a surge with all the amps turning on at once. I personally use those same SSRs on my setup at home to trigger my power conditoners on. I don't think I could trust those cheap SSRs with line voltage.

Supertech (Walmart in stock) as ST 3614 for under $4. Same exact size, same thread. Peer in through the threaded hole on the ST 3614 vs the 52-050-012 and you'll notice the exact same metal grid pattern holding back the same looking paper media. (ST 3614 is the knock off to Fram 3614 BTW). Enjoy and keep posting tip$ my friends...we're all in this together.

Valeo I-BSG 48V alternator.

Have a DC solar trailer and one of my cell batteries is hissing. Needa advice on how to fix please.

You took 7 minutes and didn’t show how you connect the fuses together.

It’s 2024 and those chickens are still pretty impressive. That aside, I saw saw a ColdFusion documentary on the DC Solar fraud case and was really curious as to how these things worked - it seemed like a really good idea (pity about the execution). This was pretty insightful.

Nice show. Did you have any issues with fires within a packed pallette? I'm doing something similar and concered about a fire lighting other cakes.

Do your research...Supertech at Walmart. Quit wasting your money

I just put one on my 2013 42 inch Cub Cadet RZTS. My knees are hitting the steering wheel. The seat is too high to work well. I wish I could move the steering wheel up.

Aaand done! My blue gl1800 trike looks sooo much better now! Thanks for the guide! ❤

Looks like a rebranded YesWelder if you ask me

That is a wonderful video. very educational. I like that you have the equipment a hobbyist would be looking at. The big names are great equipment, but more money that most of us need. I do like that you have all the safety gear, and the fire extinguisher in the drawer. If you do another video, the safety aspect would be great to cover. The splatter and UV protection , the fire safety as many home garages may have flammable equipment nearby. If I had 1 question, you mention the Lincoln 110v welder as a great start, What about starting with the Hxzvogen 2280? It is both 120 or 240, flux core or MIG, and has the synergy welding to assist you in setting up the welder for the metal and wire thickness. It can even help you learn the settings as the voltage, amperage, and wire speed are all shown when you select the synergy function.

How do i know which hoses are inlet and outlet?

Hi, any idea if this can work on an Arduino board, looking to connect it to a slot car drag Track?

where did u get the blue spreader bar with hooks to lift the cans?

Where's the bed?

MRCOOL HVAC System: amzn.to/3RDVp7m Complete kit w/pump and gauges: www.amazon.com/gp/product/B00SZ4QFW0/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=trialnerror-20&creative=9325&linkCode=as2&creativeASIN=B00SZ4QFW0&linkId=89c4a0bb2075662a32a2d66ed96ff4fa Mini Split Adapter (service port adapter): www.amazon.com/gp/product/B07W9CQ76M/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=trialnerror-20&creative=9325&linkCode=as2&creativeASIN=B07W9CQ76M&linkId=ca52469d7bedc726fa7d4ffc8f092356 Wall mount for outdoor compressor: www.amazon.com/gp/product/B00LDU9R2I/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=trialnerror-20&creative=9325&linkCode=as2&creativeASIN=B00LDU9R2I&linkId=397f284d3c939e6c81efd137b0f2c9ca Nylog Blue Sealant: www.amazon.com/gp/product/B008HOSQQQ/ref=as_li_tl?ie=UTF8&tag=trialnerror-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B008HOSQQQ&linkId=0212c4d8d8a14465fadbd8918ca3e3f2 Tubing Flair Kit: www.amazon.com/gp/product/B01LZB68U1/ref=as_li_tl?ie=UTF8&tag=trialnerror-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B01LZB68U1&linkId=3662399f5c22b114b22ebabb5d7b922d BRAND SPANKIN' NEW CHANNEL MERCH! teespring.com/stores/trial-n-error

Great practical help. Thanks much for this!!

Remember “people that make printers and people that put man on the moon are not the same people”

You just got a new subscriber 😂

To reduce intake deposits use better oil and fuel. Pennzoil Ultra Platinum is my recommendation. Never switch brands of oil. The additive packages of various brands fight each other. Use top tier gas only and a fuel system cleaner every 20k or so. The more you use the turbos the sooner you need to change the oil. Get a transmission skid plate to slow down the catalytic converter thieves. Install Bilstein Shocks. If you use your truck for hauling and towing don’t “level” it. It will get level when a trailer is hitched up in a load of gravel is dumped in. Nothing says “Poser” like a useless leveled truck tail dragging down the highway. 😜 Drive it until fully warmed up at least once a week. Short trips and low mileage are bad for these trucks. The battery will die, condensation and fuel dilution will contaminate the oil.

Testing the generator output to the Sunny Island inverters to charge the battery (SOH) at 20%... probably not good. I noticed that the Midnite Solar Charge Controller went immediately to 0000watts from the solar panels - if the generator is operating and charging there must be an interrupt between controller and SMA inverters. Is this correct to think? I am going to run for 20 minutes and see if the SOH (I thought it was SOC - state of charge) comes up a few percentages. Maybe the batteries are toast. Multimeter show 48.8. With the generating operating the front battery shows a voltage of 57.8v-58.2v and rear battery is 58v-59.02v with generator on and SMA's pushing 1-2.2kw.

You are "that" neighbor... LOL! 10 minutes in and I am laughing my butt off! Greatly Appreciated! The advice and the comedic manner in which you present it!!

Nice!!

You are a WILDMAN!! Love It!!

Just found this!! Just purchased a 3.5 with semi high mileage and runs like a charm but was looking to what I can do to prolong the life of the engine. Purchased the catch cans right away! What oil do you recommend other than what the computers says, and what plugs did you place in?? Going to do a tranny oil change. Any recommendation on tranny fluid??

Ah! 6 panels per string... got it! Reviewed and I still haven't heard what manufacturer of the panel though.

What manufacturer, watt size and voltage are your panels? I was looking at your layout and trying to figure out how each string was laid out on the roof. We will be installing our array on top of a 40' container - you are to be commended on the install on your roof! Fantastic job!! We picked up a used (cannabolized) DC Solar Trailer with the SMA's and wiring in the single box. The ten panels will need to be replaced and I am trying to figure out the type and how many panels we should use per SMA to increase output. Your (4) Midnite Solar Charge Controllers are just plugging away! WoW!! I think we should be looking into purchasing a second Midnite Solar Charge Controller if each SMA will perform better than the single on the trailer. Thanks for posting your video!

I have one Atoto A6 not exactly like this on the video, I broke my screen need a screen replacement but I couldn't find to buy, any one know where I can buy?

What is your merch shop named😂😂😂

And then you regret it. 2011 F150 3.5 EcoBoost timing at 111k miles. Ford dealer wanted $5600. A shop I trusted did it for $4k. It was suggested I replace the water pump but it wasn't bad. Would have cost an extra $200. Water pump went out last week at 117k... 6000 later. Almost $600 again. I fear whatever could be coming next.

Like a giddy kid at Christmas...

We are chasing after one of these right now (three years later)...definitely need it for our off grid build.

.... just get you ATF Type 54 license/permit for 1.3G & buy the bigger & better display fireworks. Better value & better shells, cakes, & rockets.

Hi Tom. Where did you get those edging blocks that look like cobblestones for the top path and do you know what they are called?

Real nice!

Looks awesome.

Looks good!

Excellent, you are literally a jack of all trades.

Nice work! If you need an electricity free option, a toilet bowl float may work!

Thanks for watching! Part's list here: Float Switch: amzn.to/3z1DvFj Solenoid Valve: amzn.to/3RtqFWJ 12v Power Supply: amzn.to/4eoKB6F Project Box: amzn.to/4clO3Nw Water Valves: amzn.to/4c0ad8n Solder/Heat Shrink Butt Connectors: amzn.to/3xeupo1 Blue LED's (if you're feeling fancy): amzn.to/3VhkndK Knipex Wire Strippers Seen in The vid: amzn.to/3VmOYGJ

I looked at suspension seats for a while for my ZTR. Then I came across a great deal on a used ZTR that needed some work... and it had a suspension seat. Game changer. My max mowing speed is determined by how much I get beat up by bumps in the yard. With a suspension seat, that max speed is considerably higher. I won't own another ZTR without a suspension seat. That's a nice looking seat. That may be nicer than the factory seat on mine. BTW, You CAN get a suspension seat on a ZTR. I had to get a commercial mower to get one, though.

The new ones didn’t come with the foam weather stripping…..are you getting any water inside the mirror housing or rattles?

Great video

Very nice ! so it’s a form of MDF?

I think I would have gone for an EV range extender from Alli express

Wow..awesome work

Might want to move that roll of paper towels! ;)

If you only have two of these and hook them up directly to the amplifier what would happen? What changes when you do this as opposed to leaving them as is when just running two

Does this also help while in heat mode?